WIRELESS DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Utility / Customize / Wireless Door Lock.
Select the setting by referring to the table below.
| Display | Default | Function | Setting | Relevant ECU |
| Wireless Control*1 | ON | Function that turns wireless door lock function / OFF or ON | OFF or ON | Main body ECU |
| Hazard Answer Back*1 | ON | When wireless lock switch on transmitter pressed, illuminate all hazard warning lights once. When unlock switch pressed, all hazard warning lights illuminate twice | OFF or ON | |
| Auto Lock Time*1 | 30 s | Time until relocking after unlocking with wireless door lock function | 30 s, 60 s or 120 s |