Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM (w/ VSC/Separate Type Yaw Rate Sensor)

DTC    B1000/31    Center Airbag Sensor Assembly Malfunction

for Preparation Click here


DESCRIPTION

The airbag sensor assembly consists of parts including the airbag sensor, the safing sensor, the drive circuit, the diagnosis circuit, and the ignition control circuit.
When the airbag sensor assembly receives signals from the airbag sensor, it determines whether or not the SRS should be activated.
DTC B1000/31 is stored when a malfunction is detected in the airbag sensor assembly.

DTC No.
DTC Detection Condition
Trouble Area
B1000/31
Airbag sensor assembly malfunction
Airbag sensor assembly

INSPECTION PROCEDURE

1.CHECK DTC
  1. Check for DTCs (Click here).
    Result 
    Result
    Proceed to
    DTC B1000/31 is output
    A
    DTC B1000/31 and other DTCs are output
    B

    NOTICE:
    If only DTC B1000/31 is output, do not clear the DTCs, replace the airbag sensor assembly.

    HINT:
    If any DTCs other than DTC B1000/31 are also output, troubleshoot those DTCs first.



B
GO TO DIAGNOSTIC TROUBLE CODE CHART (Click here)
A

REPLACE AIRBAG SENSOR ASSEMBLY (Click here)