Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM

WIPER AND WASHER SYSTEM > PRECAUTION

for Preparation Click here



1.WASHER NOZZLE ADJUSTMENT PRECAUTION
  1. Using a thin-bladed screwdriver, the aim of the washer nozzle can be adjusted.

    NOTICE:
    Do not use a metal pin or other such tool because it may damage the nozzle jet.

  2. If the washer nozzle is clogged with substances such as car wax etc, remove it and clean the nozzle hole with a soft resin brush or other cleaning tool.