HOOD > ADJUSTMENT |

| *1 | Centering Bolt |
| *2 | Standard Bolt |
| 1. ADJUST HOOD SUB-ASSEMBLY |
![]() |
Loosen the 4 hood side hinge bolts.
Move the hood to adjust the clearance to within the standard range (Click here).
Tighten the 4 hood side hinge bolts after the adjustment.
![]() |
Adjust the height of the hood front end by turning the 2 center hood cushions (Click here).
Adjust the hood lock.
![]() |
Loosen the 3 bolts.
Adjust the hood lock position so that the striker can enter it smoothly (Click here).
Tighten the 3 bolts after the adjustment.