Home › Vehicle Exterior › HORN › HORN

HORN > INSPECTION

for Preparation Click here



1. INSPECT LOW PITCHED HORN ASSEMBLY


    B114453E06
  1. Check the operation.
    Text in Illustration 
    *1
    Battery
    *2
    Bracket
    *a
    Component without harness connected
    (Low Pitched Horn Assembly)

    1. Apply battery voltage to the terminal and the horn bracket, and check that the horn sounds.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 1
      Battery negative (-) → Bracket
      Low pitched horn sounds

      If the result is not as specified, replace the low pitched horn assembly.