Home › Drivetrain ยท U340E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE FLUID

AUTOMATIC TRANSAXLE FLUID > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT AUTOMATIC TRANSAXLE FLUID


D025120E13

HINT:
Drive the vehicle until the engine and transaxle are at normal operating temperature.

Fluid temperature:
70 to 80 °C (158 to 176 °F)

Text in Illustration 
*a
OK if hot
*b
Add if hot
  1. Park the vehicle on a level surface and engage the parking brake.

  1. With the engine idling and the brake pedal depressed, shift the shift lever into all positions from P to L, and then return it to P.

  1. Pull out the oil level dipstick and wipe it clean.

  1. Push it fully back into the pipe.

  1. Pull it out and check that the fluid level is within the HOT range.
    If there is any leakage, repair or replace O-rings, seal packing, oil seals, plugs or other parts.