SPEED SENSOR > INSTALLATION |
| 1. INSTALL TRANSMISSION REVOLUTION SENSOR |
Coat a new O-ring with Toyota Genuine ATF WS and install it to the transmission revolution sensor.
Install the transmission revolution sensor to the automatic transaxle assembly with the bolt.
Connect the transmission revolution sensor connector.
| 2. INSTALL BATTERY CARRIER (for LHD) |
Install the battery carrier with the 5 bolts.
Engage the 6 wire harness clamps and install the wire harness.
| 3. INSTALL BATTERY CARRIER (for RHD) |
Install the battery carrier with the 5 bolts.
Engage the 7 wire harness clamps and install the wire harness.
| 4. INSTALL BATTERY TRAY |
| 5. INSTALL BATTERY |
Install the battery onto the vehicle with the battery clamp.
Connect the cable to the battery terminal.
| 6. INSPECT FOR AUTOMATIC TRANSAXLE FLUID LEAK |