SPEED SENSOR (w/ ABS) > INSTALLATION |
| 1. INSTALL TRANSMISSION REVOLUTION SENSOR |
Coat a new O-ring with Toyota Genuine ATF Type T-IV, and install it to the transmission revolution sensor.
Install the transmission revolution sensor to the automatic transaxle assembly with the bolt.
Connect the transmission revolution sensor connector.
| 2. INSTALL BATTERY CARRIER (for LHD) |
Install the battery carrier with the 5 bolts.
Engage the 6 wire harness clamps and install the wire harness.
| 3. INSTALL BATTERY CARRIER (for RHD) |
Install the battery carrier with the 5 bolts.
Engage the 7 wire harness clamps and install the wire harness.
| 4. INSTALL BATTERY TRAY |
| 5. INSTALL BATTERY |
Install the battery onto the vehicle with the battery clamp.
Connect the cable to the battery terminal.
| 6. INSPECT FOR AUTOMATIC TRANSAXLE FLUID LEAK |