Home › Drivetrain · U441E AUTOMATIC TRANSMISSION / TRANSAXLE › SPEED SENSOR (w/ ABS)

SPEED SENSOR (w/ ABS) > INSPECTION

for Preparation Click here



1. INSPECT TRANSMISSION REVOLUTION SENSOR


    C244864E01
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Transmission Revolution Sensor)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    560 to 680 Ω

    If the resistance value is not as specified, replace the transmission revolution sensor.