Home › Drivetrain ยท U340E AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION WIRE

TRANSMISSION WIRE > INSTALLATION

for Preparation Click here



1. INSTALL TRANSMISSION WIRE
  1. Coat a new O-ring with Toyota Genuine ATF WS and install it to the transmission wire.



    D025102E01
  1. Pass the transmission wire through the transaxle case.

  1. Install the transmission wire with the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the transmission wire connector.



2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
(Click here)