FRONT SPEED SENSOR > REMOVAL |
| 1. REMOVE FRONT WHEEL |
| 2. REMOVE FRONT FENDER LINER |

Remove the 7 clips, 2 screws and 4 grommets and remove the front fender liner.
| 3. REMOVE FRONT SPEED SENSOR |

Disengage the clamp from the body.
| *1 | No. 1 Clamp | *2 | No. 2 Clamp |
| *3 | No. 3 Clamp | - | - |
Disconnect the speed sensor connector.
Remove the No. 3 clamp from the body.
Disengage the 2 clamps from the body.
Remove the bolt and separate the No. 2 clamp from the body.
Remove the bolt and separate the No. 1 clamp from the shock absorber.
Remove the bolt and remove the speed sensor from the steering knuckle.