BACK DOOR SUPPORT > REMOVAL |
| 1. REMOVE BACK DOOR STAY ASSEMBLY |
![]() |
Using a screwdriver with its tip wrapped in protective tape, slightly raise the 2 stop rings, as shown in the illustration.
| *1 | Protective Tape |
Disengage the 2 ball joints and remove the back door stay.
| 2. REMOVE BACK DOOR DAMPER STAY UPPER BRACKET |
![]() |
Remove the 2 bolts and the back door damper stay upper bracket.
| 3. REMOVE BACK DOOR DAMPER STAY LOWER BRACKET |
![]() |
Remove the 2 bolts and the back door damper stay lower bracket.