Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR

OUTER REAR VIEW MIRROR > INSPECTION

for Preparation Click here



1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Power Mirror Control System)


    B116953E02
  1. Check the outer rear view mirror operation.
    Text in Illustration 
    *a
    Component without harness connected
    (Outer Rear View Mirror Assembly LH)

    1. Apply battery voltage and check the operation of the outer rear view mirror.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 5 (MV)
      Battery negative (-) → Terminal 4 (M+)
      Turns upward
      Battery positive (+) → Terminal 4 (M+)
      Battery negative (-) → Terminal 5 (MV)
      Turns downward
      Battery positive (+) → Terminal 3 (MH)
      Battery negative (-) → Terminal 4 (M+)
      Turns left
      Battery positive (+) → Terminal 4 (M+)
      Battery negative (-) → Terminal 3 (MH)
      Turns right

      If the result is not as specified, replace the outer rear view mirror assembly.



2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Power Mirror Control System)


    B116954E01
  1. Check the outer rear view mirror operation.
    Text in Illustration 
    *a
    Component without harness connected
    (Outer Rear View Mirror Assembly RH)

    1. Apply battery voltage and check the operation of the outer rear view mirror.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 5 (MV)
      Battery negative (-) → Terminal 4 (M+)
      Turns upward
      Battery positive (+) → Terminal 4 (M+)
      Battery negative (-) → Terminal 5 (MV)
      Turns downward
      Battery positive (+) → Terminal 3 (MH)
      Battery negative (-) → Terminal 4 (M+)
      Turns left
      Battery positive (+) → Terminal 4 (M+)
      Battery negative (-) → Terminal 3 (MH)
      Turns right

      If the result is not as specified, replace the outer rear view mirror assembly.