FUEL INJECTOR > REMOVAL |
| 1. DISCHARGE FUEL SYSTEM PRESSURE |
| 2. REMOVE NO. 2 CYLINDER HEAD COVER |
![]() |
Remove the 4 nuts and No. 2 cylinder head cover.
| 3. REMOVE NO. 1 IGNITION COIL |
![]() |
Disconnect the 4 No. 1 ignition coil connectors.
![]() |
Remove the 4 bolts and the 4 No. 1 ignition coils.
| 4. REMOVE VENTILATION HOSE |
![]() |
Disconnect the ventilation hose.
| 5. REMOVE FUEL VAPOR FEED HOSE ASSEMBLY |
![]() |
Disconnect the fuel vapor feed hose assembly.
| 6. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY |
![]() |
Disconnect the fuel injector connectors.
for LHD:
![]() |
Disconnect the connector and 4 wire harness clamps shown in the illustration and disconnect the engine wire harness.
![]() |
Remove the bolt and the wire harness bracket.
for RHD:
![]() |
Disconnect the connector and 3 wire harness clamps shown in the illustration and disconnect the engine wire harness.
![]() |
Remove the 9 bolts, 2 nuts and 2 seal washers and then remove the cylinder head cover sub-assembly.
| 7. REMOVE FUEL TUBE SUB-ASSEMBLY |
![]() |
Remove the fuel pipe clamp.
![]() |
Pinch the retainer of the fuel tube connector, then pull the fuel tube connector to disconnect the fuel tube out of the fuel delivery pipe sub-assembly.
| *1 | Retainer |
| *2 | Fuel Pipe |
| *3 | O-Ring |
| *4 | Nylon Tube |
![]() | Pinch |
![]() | Pull |
| 8. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY |
![]() |
Remove the 3 bolts and the fuel delivery pipe sub-assembly with 4 fuel injectors.
| 9. REMOVE NO. 1 DELIVERY PIPE SPACER |
![]() |
Remove the 2 No. 1 delivery pipe spacers.
| 10. REMOVE INJECTOR VIBRATION INSULATOR |
![]() |
Remove the 4 injector vibration insulators.
| 11. REMOVE FUEL INJECTOR ASSEMBLY |
![]() |
Pull the 4 fuel injector assemblies out of the fuel delivery pipe sub-assembly.
![]() | Pull |