Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR WINDOW FRAME MOULDING (for Rear Side)

FRONT DOOR WINDOW FRAME MOULDING (for Rear Side) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT DOOR WINDOW FRAME REAR MOULDING
  1. Clean the attachment surface.

    1. Using an infrared light, heat the adhesive remaining on the body.

      CAUTION:
      Do not burn yourself with the heated body or infrared light.

    2. Using a piece of cloth, rub the remaining adhesive off the body.

    3. Using a non-residue solvent, clean the attachment surface.

  1. Remove the release paper from the front door window frame rear moulding.

  1. Engage the 2 clips and install a new front door window frame rear moulding.

    NOTICE:
    Thoroughly press the front door window frame rear moulding to ensure that it adheres.