Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR WINDOW FRAME MOULDING (for Center)

FRONT DOOR WINDOW FRAME MOULDING (for Center) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT DOOR WINDOW FRAME UPPER MOULDING
  1. Clean the attachment surface.

    1. Using an infrared light, heat the adhesive remaining on the body.

      Heating Temperature:
      Item
      Temperature
      Vehicle Body
      40 to 60°C (104 to 140°F)

      CAUTION:
      Do not burn yourself with the heated body or infrared light.

      NOTICE:
      Do not heat the vehicle body excessively.

    2. Using a piece of cloth, rub the remaining adhesive off the front door front lower frame.

    3. Using a non-residue solvent, clean the attachment surface.

  1. Remove the release paper from the front door window frame upper moulding.

  1. Engage the 3 guides and install a new front door window frame upper moulding.
    Text in Illustration 
    *1
    Double-sided tape

    NOTICE:
    Thoroughly press the front door window frame upper moulding to ensure that it adheres.