Home › Drivetrain ยท U441E AUTOMATIC TRANSMISSION / TRANSAXLE › OIL PUMP

OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL FRONT OIL PUMP OIL SEAL


C081416E01
  1. Coat a new front oil pump oil seal lip with MP grease.

  1. Using SST and a hammer, install the front oil pump oil seal to the front oil pump body.

    SST
    09223-00010  

    Drive in depth:
    -0.15 to 0.15 mm (-0.00591 to 0.00591 in.)



2. INSTALL FRONT OIL PUMP DRIVEN GEAR


C059989E01
  1. Coat the front oil pump driven gear with Toyota Genuine ATF Type T-IV, and install it to the front oil pump body.



3. INSTALL FRONT OIL PUMP DRIVE GEAR


C059808E01
  1. Coat the front oil pump drive gear with Toyota Genuine ATF Type T-IV, and install it to the front oil pump body.



4. INSTALL STATOR SHAFT ASSEMBLY


C059807E02
  1. Align the stator shaft assembly with the bolt holes.

  1. Install the 8 bolts.

    Torque:
    9.8 N*m{ 100 kgf*cm , 87 in.*lbf }



5. INSPECT OIL PUMP ASSEMBLY


C059941E01
  1. Using 2 screwdrivers, make sure that the front oil pump drive gear turns smoothly.



6. INSTALL FRONT OIL PUMP BODY O-RING


C067790E04
  1. Coat a new front oil pump body O-ring with Toyota Genuine ATF Type T-IV, and install it to the front oil pump body.