Home › Drivetrain ยท U441E AUTOMATIC TRANSMISSION / TRANSAXLE › VALVE BODY ASSEMBLY

VALVE BODY ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 SOLENOID LOCK PLATE


    C203896
  1. Remove the 2 bolts and the No. 1 solenoid lock plate from the transmission valve body assembly.



2. REMOVE SHIFT SOLENOID VALVE SL


    C244598
  1. Remove the bolt and pull out the shift solenoid valve SL from the transmission valve body assembly.



    C203898
  1. Pull the sleeve out of the shift solenoid valve SL.

  1. Using a screwdriver, remove the O-ring from the shift solenoid valve SL.



3. REMOVE SHIFT SOLENOID VALVE SLT


    C203899
  1. Remove the bolt and pull out the shift solenoid valve SLT from the transmission valve body assembly.



4. REMOVE SHIFT SOLENOID VALVE S1


    C203900
  1. Remove the bolt and pull out the shift solenoid valve S1 from the transmission valve body assembly.

  1. Using a screwdriver, remove the O-ring from the shift solenoid valve S1.



5. REMOVE SHIFT SOLENOID VALVE S2


    C203901
  1. Remove the bolt and pull out the shift solenoid valve S2 from the transmission valve body assembly.

  1. Using a screwdriver, remove the O-ring from the shift solenoid valve S2.



6. REMOVE SHIFT SOLENOID VALVE ST


    C203902
  1. Remove the bolt and pull out the shift solenoid valve ST from the transmission valve body assembly.

  1. Using a screwdriver, remove the O-ring from the shift solenoid valve ST.