Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for RH Side)

REAR SEAT INNER BELT ASSEMBLY (for RH Side) > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH


    B272852E01
  1. Install the rear seat inner with center belt assembly RH with the bolt.

    Torque:
    41 N*m{ 420 kgf*cm , 30 ft.*lbf }

    NOTICE:
    1. Install the anchor plate with the arrow mark facing forward.
    2. Do not place the anchor plate over the convex area of the floor panel.

    Text in Illustration 
    *a
    Arrow Mark
    *b
    Convex



2. INSTALL REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY (for Fold Down Seat Type)


    B272781E02
  1. Pass the rear seat inner belt through the slit of the rear seat cushion cover with pad sub-assembly.
    Text in Illustration 
    *1
    Rear Side of Rear Seat Cushion Frame
    *2
    Rear Seat Cushion Lock Hook

  1. Align the rear side of the rear seat cushion frame with the 2 hooks.

  1. Engage the 2 hooks with the rear seat cushion lock hooks to install the rear seat cushion cover with pad sub-assembly.

    NOTICE:
    Check that the rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.



3. INSTALL REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY (for 60/40 Split Seat Type)


    B272781E02
  1. Pass the rear seat inner belt through the slit of the rear seat cushion cover with pad sub-assembly.
    Text in Illustration 
    *1
    Rear Side of Rear Seat Cushion Frame
    *2
    Rear Seat Cushion Lock Hook

  1. Align the rear side of the rear seat cushion frame with the 2 hooks.

  1. Engage the 2 hooks with the rear seat cushion lock hooks to install the rear seat cushion cover with pad sub-assembly.

    NOTICE:
    Check that the rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.