REAR SEAT INNER BELT ASSEMBLY (for RH Side) > REMOVAL |
| 1. REMOVE REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY (for 60/40 Split Seat Type) |
![]() |
| *1 | Rear Seat Cushion Lock Hook |
| *2 | Rear Side of Rear Seat Cushion Frame |
Lift up the front edge of the rear seat cushion with cover pad sub-assembly as shown in the illustration and disengage the 2 hooks from the rear seat cushion lock hooks.
Pass the rear seat inner belt through the slit of the rear seat cushion cover with pad sub-assembly, disengage the 2 hooks from the rear side of the rear seat cushion frame, and remove the rear seat cushion cover with pad sub-assembly.
| 2. REMOVE REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY (for Fold Down Seat Type) |
![]() |
Pass the rear seat inner belt through the slit of the rear seat cushion cover with pad sub-assembly.
| *1 | Rear Side of Rear Seat Cushion Frame |
| *2 | Rear Seat Cushion Lock Hook |
Align the rear side of the rear seat cushion frame with the 2 hooks.
Engage the 2 hooks with the rear seat cushion lock hooks to install the rear seat cushion cover with pad sub-assembly.
| 3. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH |
![]() |
Remove the bolt and the rear seat inner with center belt assembly RH.