Home › Brake › BRAKE (REAR) › REAR BRAKE

REAR BRAKE > REMOVAL

for Preparation Click here



1. REMOVE REAR CONSOLE BOX
(Click here)


2. REMOVE REAR WHEEL


3. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.



4. LOOSEN PARKING BRAKE CABLE


C234723E03
  1. Loosen the equalizer and lock nut.
    Text in Illustration 
    *1
    Parking Brake Equalizer
    *2
    Lock Nut

    NOTICE:
    Do not reuse the loosened nut.



5. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY
  1. Release the parking brake and remove the rear brake drum.
    If the rear brake drum cannot be removed easily, perform the following procedure.



    C233134E01
  1. Remove the hole plug and insert a screwdriver through the hole into the backing plate, and hold the automatic adjust lever away from the adjuster.
    Text in Illustration 
    *1
    Automatic Adjust Lever
    V100135
    Contract

  1. Using another screwdriver, contract the brake shoe by turning the adjusting bolt.