PILLAR SPEAKER > REMOVAL |
| 1. REMOVE FRONT PILLAR GARNISH (w/ Curtain Shield Airbag) |
![]() |
Disengage the front pillar garnish clip and the clip.
| *1 | Front Pillar Garnish Clip |
![]() |
Using needle nose pliers, turn the front pillar garnish clip 90° and disengage it from the front pillar garnish.
| *1 | Protective Tape |
Disengage the 2 guides and remove the front pillar garnish.
for 6 speakers:
Disconnect the connector.
![]() |
Protect the curtain shield airbag assembly.
| *1 | Adhesive Tape |
| *2 | Protective Cover |
| *3 | Curtain Shield Airbag Assembly |
Cover the airbag with a cloth or piece of nylon and secure the ends of the cover with tape as shown in the illustration.
| 2. REMOVE FRONT PILLAR GARNISH (w/o Curtain Shield Airbag) |
![]() |
Disengage the 2 clips and the 2 guides and remove the front pillar garnish.
for 6 speakers:
Disconnect the connector.
| 3. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY |
![]() |
Disengage the 3 claws and remove the speaker.