Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM

SEAT BELT WARNING SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



SEAT BELT WARNING SYSTEM DESCRIPTION
If a seat belt is not fastened, this system flashes the seat belt warning light or sounds the seat belt warning buzzer as a reminder.
  1. Front seat belt warning light (driver side seat belt warning function):
    When the driver seat belt is not fastened with the ignition switch ON, the front seat belt warning light in the combination meter assembly blinks to inform the driver. The main body ECU (multiplex network body ECU) detects the driver seat belt status and sends signals to the combination meter assembly using the CAN.

  2. Front seat belt warning light (front passenger side seat belt warning function):
    When the front passenger seat belt is not fastened with the ignition switch ON and the front passenger seat occupied, the front seat belt warning light in the combination meter assembly blinks. The combination meter assembly displays the front passenger seat belt status and whether the front passenger seat is occupied.

  3. Seat belt warning buzzer:

    1. for Australia:
      The seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 30 seconds, and then the buzzer sounds at an interval of 0.4 seconds for 90 seconds when the vehicle is driven at approximately 20 km/h (12.5 mph) or more and any of the following conditions are met: 1) the driver seat belt is unfastened, 2) the front passenger seat belt is unfastened with the front passenger seat occupied.

    2. for G.C.C.
      When the vehicle is driven at 20 km/h (12 mph) or more with the front passenger seat occupied and the driver or front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly sounds once. When 30 seconds have passed after the buzzer sounded, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 9.6 seconds. After that, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 0.4 seconds for 20 seconds.


FUNCTION OF MAIN COMPONENTS
The following functions are available.

Components
Function
Front seat inner belt (driver side buckle switch)
Informs main body ECU (multiplex network body ECU) of driver seat belt condition (fastened or unfastened)
Front seat inner belt (front passenger side buckle switch)
Informs combination meter assembly of front passenger seat belt condition (fastened or unfastened)
Occupant detection sensor
Informs combination meter assembly of front passenger seat condition (occupied or unoccupied)
Front seat belt warning light
  1. If driver seat belt is unfastened and ignition switch is ON, combination meter flashes seat belt warning light in combination meter assembly as reminder
  2. When front passenger seat is occupied and ignition switch is ON, if front passenger seat belt is unfastened, combination meter flashes seat belt warning light in combination meter assembly as reminder
Seat belt warning buzzer
If vehicle is driven at approximately 20 km/h (12.5 mph) or more with any of following conditions met, combination meter sounds buzzer as reminder: 1) driver seat belt is unfastened, 2) front passenger seat belt is unfastened with front passenger seat occupied.