Home › Vehicle Interior › DOOR LOCK › REAR DOOR LOCK

REAR DOOR LOCK > INSPECTION

for Preparation Click here



1. INSPECT REAR DOOR LOCK ASSEMBLY LH


    B228541E11
  1. Check the operation of the door lock motor.
    Text in Illustration 
    *a
    Component without harness connected
    (Rear Door Lock Assembly LH)
    *b
    UNLOCK
    *c
    LOCK

    1. Apply battery voltage and check the operation of the rear door lock motor.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 4 (L)
      Battery negative (-) → Terminal 1 (UL)
      Locked
      Battery positive (+) → Terminal 1 (UL)
      Battery negative (-) → Terminal 4 (L)
      Unlocked

      If the result is not as specified, replace the rear door lock assembly LH.



2. INSPECT REAR DOOR LOCK ASSEMBLY RH


    B228542E11
  1. Check the operation of the rear door lock motor.
    Text in Illustration 
    *a
    Component without harness connected
    (Rear Door Lock Assembly RH)
    *b
    LOCK
    *c
    UNLOCK

    1. Apply battery voltage and check the operation of the rear door lock motor.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 4 (L)
      Battery negative (-) → Terminal 1 (UL)
      Locked
      Battery positive (+) → Terminal 1 (UL)
      Battery negative (-) → Terminal 4 (L)
      Unlocked

      If the result is not as specified, replace the rear door lock assembly RH.