Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR

OUTER REAR VIEW MIRROR > INSTALLATION

for Preparation Click here



1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY
  1. Engage the 3 guides.

  1. Engage the claw and install the outer rear view mirror assembly with the 3 screws.

    NOTICE:
    When the outer rear view mirror assembly is reused, do not incline the screws while temporarily tightening them to prevent the screw threads from being damaged.

    Torque:
    11 N*m{ 107 kgf*cm , 8 ft.*lbf }

  1. Connect connector.

    HINT:
    If the outer rear view mirror is equipped with power mirror control system, connect the connector.



2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for 5 Door)

HINT:
Use the same procedure as for the RH side .



3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for 3 Door)

HINT:
Use the same procedure as for the RH side .



4. INSTALL FRONT ARMREST BASE UPPER PANEL (w/ Power Window)

HINT:
Use the same procedure as for the RH side .



5. INSTALL FRONT ARMREST BASE UPPER PANEL (w/o Power Window)

HINT:
Use the same procedure as for the RH side .



6. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)

HINT:
Use the same procedure as for the RH side .