LOWER INSTRUMENT PANEL > REASSEMBLY |
| 1. INSTALL POWER OUTLET SOCKET COVER |
![]() |
Align the protrusion of the power outlet socket cover with the cutout of the lower instrument panel.
Engage the 2 claws and install the power outlet socket cover.
| 2. INSTALL POWER OUTLET SOCKET ASSEMBLY |
![]() |
Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and install the power outlet socket.
![]() |
Turn the power outlet socket counterclockwise and securely engage the claw.
Connect the connector.
| 3. INSTALL NO. 2 SPARE SWITCH HOLE COVER |
![]() |
Engage the 2 claws and install the hole cover.
| 4. INSTALL OUTER MIRROR SWITCH ASSEMBLY (w/ Power Mirror Control System) |
![]() |
Engage the 2 claws and install the switch.
| 5. INSTALL REMOTE CONTROL MIRROR HOLE COVER |
![]() |
Engage the 4 claws and install the hole cover.
| 6. INSTALL SPARE SWITCH HOLE COVER (for RHD) |
![]() |
Engage the 2 claws and install the hole cover.
| 7. INSTALL NO. 1 INSTRUMENT PANEL BOX |
![]() |
Engage the 2 guides and 2 clips.
Install the instrument panel box with the 3 <A> screws.
| 8. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY |
![]() |
Engage the claw and install the glove compartment door stopper.
| 9. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD |
![]() |
Engage the 2 claws and install the instrument panel safety pad.
| 10. INSTALL NO. 2 INSTRUMENT PANEL SAFETY PAD |
![]() |
Engage the 2 claws and install the instrument panel safety pad.