Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Driver Side)

FRONT SEAT ASSEMBLY (for Driver Side) > REASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
The procedure described below is for the LHD side. Use the same procedure for both the LHD and RHD side, unless otherwise specified.



1. INSTALL SEAT TRACK ADJUSTING HANDLE


    B273286
  1. Engage the 2 hooks to install the seat track adjusting handle to the separate type front seat cushion spring assembly.



2. INSTALL SEAT ADJUSTER COVER CAP


    B268943
  1. Install the 2 seat adjuster cover caps.



3. INSTALL SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    B283255
  1. Install the separate type front seatback spring assembly with the 4 bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



4. INSTALL SEAT CUSHION EDGE PROTECTOR RH (w/ Vertical Adjuster)


    B283253
  1. Engage the 2 guides to install the seat cushion edge protector RH.

  1. Install the screw.



5. INSTALL SEAT CUSHION EDGE PROTECTOR LH (w/ Vertical Adjuster)


    B283251
  1. Engage the 2 guides to install the seat cushion edge protector LH.

  1. Install the screw.



6. INSTALL SEAT CUSHION EDGE PROTECTOR RH (w/o Vertical Adjuster)


    B283254
  1. Engage the 2 guides to install the seat cushion edge protector RH.

  1. Install the screw.



7. INSTALL SEAT CUSHION EDGE PROTECTOR LH (w/o Vertical Adjuster)


    B283252
  1. Engage the 2 guides to install the seat cushion edge protector LH.

  1. Install the screw.



8. INSTALL FRONT SEAT CUSHION LOWER SHIELD RH (w/ Vertical Adjuster)


    B273283
  1. Engage the clip and install the screw.



    B273289
  1. Engage the hook to install the front seat cushion lower shield RH as shown in the illustration.



9. INSTALL FRONT SEAT CUSHION LOWER SHIELD LH (w/ Vertical Adjuster)


    B273285
  1. Engage the clip and install the screw.



    B273290
  1. Engage the hook to install the front seat cushion lower shield LH as shown in the illustration.



10. INSTALL RECLINING ADJUSTER INSIDE COVER RH


    B283246
  1. Engage the guide to install the reclining adjuster inside cover RH.



11. INSTALL RECLINING ADJUSTER INSIDE COVER LH


    B283245
  1. Engage the guide to install the reclining adjuster inside cover LH.



12. INSTALL FRONT SEAT CUSHION LOWER SHIELD (w/ Vertical Adjuster)


    B283244
  1. Engage the 2 claws to install the front seat cushion lower shield.



13. INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)


    B287807
  1. Install the front seat side airbag assembly with 2 new nuts.

    CAUTION:
    1. The nuts must not be reused.
    2. Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }



    B272934
  1. Engage the 2 clamps.



14. INSTALL SEPARATE TYPE FRONT SEATBACK COVER

NOTICE:
  1. For vehicles with side airbags, the side airbags may not be activated normally unless the separate type front seatback cover is securely installed.
  2. Check that the strap is not twisted after installing the bracket.
  3. Install the bracket securely.



    B272777E02
  1. Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 6 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



15. INSTALL SEATBACK COVER WITH PAD


    B283257
  1. Temporarily install the front seatback cover with pad. (w/ Front Seat Side Airbag)

  1. Install the front seatback cover bracket with the 2 nuts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

    NOTICE:
    1. For vehicles with side airbags, the side airbags may not be activated normally unless the front seatback cover is securely installed.
    2. Check that the strap is not twisted after installing the bracket.
    3. Install the bracket securely.



    B272974
  1. Fasten the 2 zippers. (for Sport Package)



    B272765E03
  1. Align the protruding portion of the front seat headrest support with the installation groove of the front seatback spring assembly.
    Text in Illustration 
    *a
    Protruding

  1. Engage the 4 claws to install the 2 front seat headrest supports.



    B284663E01
  1. Using hog ring pliers, install 3 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    Do not soil or scratch the front seatback cover.



    B284664E01
  1. Using hog ring pliers, install 3 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    Do not soil or scratch the front seatback cover.



16. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    B272775E03
  1. Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 14 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the separate type front seat cushion pad.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



    B289325E01
  1. Using hog ring pliers, install the 2 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



17. INSTALL SEAT CUSHION COVER WITH PAD


  1. Engage the 5 hooks and temporarily install the seat cushion cover with pad.


    B283238



    B283237
  1. Engage the 2 hooks.



    B288456
  1. Engage the 7 clamps to install the front seat side airbag wire harness. (w/ Front Seat Side Airbag)



    B272761
  1. Engage the 4 hooks to install the seat cushion cover with pad.



    B287792
  1. Fasten the hook and loop fastener. (w/ Front Seat Side Airbag)



    B283231
  1. Connect the seatback cover band.



18. INSTALL FRONT SEAT CUSHION INNER SHIELD


    B283230
  1. Engage the 2 claws to install the front seat cushion inner shield.



19. INSTALL FRONT SEAT CUSHION SHIELD


    B283229
  1. Engage the clip and 2 claws to install the front seat cushion shield.

  1. Install the screw.



20. INSTALL VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)


    B283228
  1. Install the vertical adjusting handle with the screw.



21. INSTALL RECLINING ADJUSTER RELEASE HANDLE


    B283227
  1. Engage the claw to install the reclining adjuster release handle.



22. INSTALL FRONT SEAT HEADREST ASSEMBLY
  1. Install the front seat headrest assembly.



23. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    B288269E02
  1. Install the front seat inner belt assembly with the bolt. (for 4 Way Seat Type)

    Torque:
    41 N*m{ 420 kgf*cm , 30 ft.*lbf }

    NOTICE:
    Do not place the front seat inner belt over the convex areas of the front seat with frame adjuster.

    Text in Illustration 
    *a
    Convex

  1. Engage the clamp. (for 4 Way Seat Type)



    B286794E01
  1. Install the front seat inner belt assembly with the bolt. (for 6 Way Seat Type)

    Torque:
    41 N*m{ 420 kgf*cm , 30 ft.*lbf }

    NOTICE:
    Do not place the front seat inner belt over the convex areas of the front seat with frame adjuster.

    Text in Illustration 
    *a
    Convex

  1. Engage the 2 clamps. (for 6 Way Seat Type)

  1. Engage the 5 clamps.

  1. Install the front seat cushion cover with the 4 clips. (for LHD)