Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Front Passenger Side)

FRONT SEAT ASSEMBLY (for Front Passenger Side) > REASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
The procedure described below is for the LHD side. Use the same procedure for both the LHD and RHD side, unless otherwise specified.



1. INSTALL SEAT TRACK ADJUSTING HANDLE


    B287806
  1. Engage the 2 hooks to install the seat track adjusting handle to the separate type front seat cushion spring assembly.



2. INSTALL SEAT ADJUSTER COVER CAP


    B268943
  1. Install the 2 seat adjuster cover caps.



3. INSTALL SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    B287805
  1. Install the separate type front seatback spring assembly with the 4 bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



4. INSTALL SEAT LOCK CONTROL CABLE ASSEMBLY (for 3 Door)


    B287804
  1. Engage the 2 cable end and 2 clamps to install the seat lock control cable assembly.



5. INSTALL RECLINING REMOTE CONTROL CABLE ASSEMBLY (for 3 Door)


    B287803
  1. Engage the cable clamp and 3 clamps to install the reclining remote control cable assembly.



6. INSTALL RECLINING ADJUSTER EQUALIZING CABLE ASSEMBLY (for 3 Door)


    B287802E01
  1. Engage the nipple end and clamp to install the reclining adjuster equalizing cable assembly.
    Text in Illustration 
    *1
    Casing cap

  1. Install the casing cap.



7. INSTALL SEAT CUSHION EDGE PROTECTOR RH


    B283254
  1. Engage the 2 guides to install the seat cushion edge protector RH.

  1. Install the screw.



8. INSTALL SEAT CUSHION EDGE PROTECTOR LH


    B283252
  1. Engage the 2 guides to install the seat cushion edge protector LH.

  1. Install the screw.



9. INSTALL RECLINING ADJUSTER INSIDE COVER RH


    B287800
  1. Engage the guide to install to reclining adjuster inside cover RH.



10. INSTALL RECLINING ADJUSTER INSIDE COVER LH


    B287801
  1. Engage the guide to install to reclining adjuster inside cover LH.



11. INSTALL RECLINING REMOTE CONTROL BASE (for 3 Door)


    B288454
  1. Engage the 4 guides to install the reclining remote control base.



12. INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)


    B283243
  1. Install the front seat side airbag assembly with 2 new nuts.

    CAUTION:
    1. The nuts must not be reused.
    2. Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }



    B283242
  1. Engage the 2 clamps.



13. INSTALL SEPARATE TYPE FRONT SEATBACK COVER

NOTICE:
  1. For vehicles with side airbags, the side airbags may not be activated normally unless the separate type front seatback cover is securely installed.
  2. Check that the strap is not twisted after installing the bracket.
  3. Install the bracket securely.



    B272777E02
  1. Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 6 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



14. INSTALL SEATBACK COVER WITH PAD


    B287799
  1. Temporarily install the front seatback cover with pad.

  1. Install the front seatback cover bracket with the 2 nuts. (w/ Front Seat Side Airbag)

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

    NOTICE:
    1. For vehicles with side airbags, the side airbags may not be activated normally unless the front seatback cover is securely installed.
    2. Check that the strap is not twisted after installing the bracket.
    3. Install the bracket securely.



    B272974
  1. Fasten the 2 zippers. (for Sport Package)



    B272765E03
  1. Align the protruding portion of the front seat headrest support with the installation groove of the front seatback spring assembly.
    Text in Illustration 
    *a
    Protruding

  1. Engage the 4 claws to install the 2 front seat headrest supports.



    B287798E01
  1. Using hog ring pliers, install 3 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    Do not soil or scratch the front seatback cover.



    B287796E01
  1. Using hog ring pliers, install 3 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    Do not soil or scratch the front seatback cover.



15. INSTALL RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY (for 3 Door)


    B288451
  1. Engage the cable end and clamp to the reclining remote control lever sub-assembly as shown in the illustration.



    B288408
  1. Install the control lever sub-assembly with the 2 screws.



    B293852
  1. Engage the claw and 2 guide to install the reclining remote control lever cover.



16. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    B272775E03
  1. Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 14 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the separate type front seat cushion pad.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



    B272773E02
  1. Using hog ring pliers, install the 2 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



17. INSTALL SEAT CUSHION COVER WITH PAD


  1. Engage the 5 hooks and temporarily install the seat cushion cover with pad.


    B287794



    B287793
  1. Engage the 2 hooks.



    B283260
  1. Engage the guide to install the occupant detection sensor. (w/ Occupant Detection Sensor)



    B289866
  1. Engage the 7 clamps to install the front seat side airbag wire harness. (w/ Front Seat Side Airbag)



    B272761
  1. Engage the 4 hooks to install the seat cushion cover with pad.



    B289256
  1. Fasten the hook and loop fastener. (w/ Front Seat Side Airbag)



    B287791
  1. Connect the seatback cover band.



18. INSTALL FRONT SEAT CUSHION INNER SHIELD


    B272755
  1. Engage the 2 claws to install the front seat cushion inner shield.



19. INSTALL FRONT SEAT CUSHION SHIELD


    B287790
  1. Engage the clip and 2 claws to install the front seat cushion shield.

  1. Install the screw.



20. INSTALL RECLINING ADJUSTER RELEASE HANDLE


    B287789
  1. Engage the claw to install the reclining adjuster release handle.



21. INSTALL FRONT SEAT HEADREST ASSEMBLY
  1. Install the front seat headrest assembly.



22. INSTALL FRONT SEAT INNER BELT ASSEMBLY (w/o Wire Harness)


    B288295E02
  1. Install the front seat inner belt assembly with the bolt.

    Torque:
    41 N*m{ 420 kgf*cm , 30 ft.*lbf }

    NOTICE:
    Do not place the front seat inner belt over the convex areas of the front seat with frame adjuster.

    Text in Illustration 
    *a
    Convex



23. REMOVE FRONT SEAT INNER BELT ASSEMBLY (w/ Wire Harness)


    B270851E03
  1. Install the front seat inner belt assembly with the bolt.

    Torque:
    41 N*m{ 420 kgf*cm , 30 ft.*lbf }

    NOTICE:
    Do not place the front seat inner belt over the convex areas of the front seat with frame adjuster.

    Text in Illustration 
    *a
    Convex

  1. Engage the clamp.

  1. Install the 6 clamps.

  1. Connect the occupant detection sensor connector.