Home › Vehicle Interior › DOOR LOCK › BACK DOOR LOCK

BACK DOOR LOCK > INSPECTION

for Preparation Click here



1. INSPECT BACK DOOR LOCK ASSEMBLY


    E222051E02
  1. Check the operation of the back door lock motor.
    Text in Illustration 
    *1
    Latch
    *a
    Lock
    *b
    Unlock
    *c
    Component without harness connected
    (Back Door Lock Assembly)

    1. Move the back door lock to the lock position.

    2. Apply the battery voltage and check the operation of the back door lock motor.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 1 (ACT+)
      Battery negative (-) → 2 (ACT-)
      Locked → Unlocked

      1. If the result is not as specified, replace the back door lock assembly.