Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM

LIGHTING SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU

E217205E02


Text in Illustration 
*A
for LHD
*B
for RHD
*1
Instrument Panel Junction Block Assembly
*2
Main Body ECU
  1. Remove the main body ECU.

  2. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    MB-3 (BCYL) - Body ground
    -
    Battery power supply
    Always
    11 to 14 V
    MB-11 (GND1) - Body ground
    -
    Ground
    Always
    Below 1 Ω
    MB-29 (ACC) - Body ground
    -
    Ignition power supply (ACC signal)
    Ignition switch ACC
    11 to 14 V
    MB-30 (BECU) - Body ground
    -
    Battery power supply
    Always
    11 to 14 V
    MB-32 (IG) - Body ground
    -
    Ignition power supply (IG signal)
    Ignition switch ON
    11 to 14 V
    If the result is not as specified, there may be a malfunction in the wire harness.

  3. Reinstall the main body ECU.

  4. Measure the voltage according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    F76-1 (BCTY) - Body ground*1
    B - Body ground
    Back door courtesy switch signal
    Back door opened
    Below 1 V
    Back door closed
    11 to 14 V*6
    Pulse generation*8
    F76-6 (LRCY) - Body ground*2
    G - Body ground
    Rear door courtesy light switch signal
    Rear door LH or RH opened
    Below 1 V
    Rear door LH and RH closed
    Pulse generation
    F76-7 (LSFL) - Body ground*3*4
    L - Body ground
    Front door LH unlock detection switch signal
    Front door LH locked
    Pulse generation
    Front door LH unlocked
    Below 1 V
    F76-18 (LSFR) - Body ground*3*5
    LG - Body ground
    Front door RH unlock detection switch signal
    Front door RH locked
    Pulse generation
    Front door RH unlocked
    Below 1 V
    F76-19 (FRCY) - Body ground
    Y - Body ground
    Front door courtesy light switch RH signal
    Front door RH opened
    Below 1 V
    Front door RH closed
    Pulse generation
    3A-5 - Body ground
    SB - Body ground
    Battery power supply
    Always
    11 to 14 V
    3B-6 (ILE) - Body ground
    B - Body ground
    Illumination signal
    Map light switch in DOOR position and map light assembly comes on
    Below 1 V
    Map light switch in DOOR position and map light assembly comes off
    11 to 14 V
    3D-6 (BCTL) - Body ground*6
    L - Body ground
    No. 2 room light power supply
    Always
    11 to 14 V
    3D-35 (BCTY) - Body ground*7
    B - Body ground
    Back door courtesy switch signal
    Back door opened
    Below 1 V
    Back door closed
    11 to 14 V*6
    Pulse generation*8
    3D-36 (FLCY) - Body ground
    L - Body ground
    Front door courtesy light switch LH signal
    Front door LH opened
    Below 1 V
    Front door LH closed
    Pulse generation

    1. *1: w/o Automatic Light Control System
    2. *2: for 5 Door
    3. *3: w/ Power Door Lock
    4. *4: for LHD
    5. *5: for RHD
    6. *6: w/ No. 2 Room Light
    7. *7: w/ Automatic Light Control System
    8. *8: w/o No. 2 Room Light

    HINT:
    If the result is not as specified, the main body ECU or instrument panel junction block assembly may have a malfunction.