Home › Drivetrain ยท U340E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER

SHIFT LEVER > ADJUSTMENT

for Preparation Click here



1. REMOVE REAR CONSOLE BOX ASSEMBLY
(Click here)


2. ADJUST SHIFT LEVER POSITION
  1. Move the shift lever to N.



    C195135E01
  1. Slide the adjuster case cover in the direction shown by the arrow.
    Text in Illustration 
    *1
    Adjuster Case
    *2
    Cover
    *3
    Lock Piece

  1. Using a precision screwdriver, pull up the lock piece.



    C195136E01
  1. Press the lock piece into the adjuster case.
    Text in Illustration 
    *1
    Adjuster Case
    *2
    Lock Piece
    *3
    Cable Rod
    *4
    Cover

    HINT:
    Lightly pull the cable rod towards the back of the vehicle to eliminate slack, and then lock the adjuster.

  1. Slide the adjuster case cover in the direction shown by the arrow.

    NOTICE:
    If the cover is not pushed over the protrusion on the lock, the cable will not lock and shift operation will not be accurate.



3. INSTALL REAR CONSOLE BOX ASSEMBLY
(Click here)