SHIFT LEVER > REMOVAL |
| 1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly from the shift lever assembly.
| 2. REMOVE REAR CONSOLE BOX ASSEMBLY |
| 3. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY |
Move the shift lever to N.
![]() |
Disconnect the end of the transmission control cable assembly from the shift lever assembly.
![]() |
Rotate the nut counterclockwise approximately 180°, and while supporting the nut, separate the transmission control cable assembly from the shift lever retainer.
| *1 | Nut |
| 4. REMOVE SHIFT LEVER ASSEMBLY |
![]() |
Disconnect the 2 connectors from the shift lever assembly.
Disengage the 3 clamps and separate the wire harness from the shift lever assembly.
![]() |
Remove the 4 bolts and the shift lever assembly.