Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BLACK OUT TAPE (for Front Door)

BLACK OUT TAPE (for Front Door) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure described below is for the LH side.



1. REMOVE FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY
(Click here)


2. REMOVE FRONT DOOR GLASS RUN

HINT:
Use the same procedure as for the RH side .



3. REMOVE NO. 1 BLACK OUT TAPE


    B272530
  1. Using an infrared light, heat the black out tape.
    Heating Temperature 
    Item
    Temperature
    Vehicle Body
    40 to 60°C (104 to 140°F)

    CAUTION:
    Do not burn yourself on the hot body panel or with the infrared light.

    NOTICE:
    Do not heat the vehicle body excessively.

  1. Lift the end portion with your fingernail and peel it parallel to the attachment surface.