WIRELESS DOOR LOCK CONTROL SYSTEM > REGISTRATION |
| 1. REGISTRATION OF RECOGNITION CODE (USING INTELLIGENT TESTER) |
Connect an intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Utility / Wireless Code Registration.
Press both lock and unlock switches within 1 to 1.5 seconds.
Press either switch for more than 1 second within 3 seconds.
Perform either of the following to complete the registration of recognition codes:
Perform the following after registration is completed.
Perform the wireless door lock control operation check (Click here).