FUEL TANK > REMOVAL |
| 1. PRECAUTION |
![]() |
When removing and storing the fuel tank assembly, arrange the inlet hose as shown in the illustration, and secure the fuel tank assembly using a cord or similar.
| *1 | Cord |
| 2. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE |
| 3. DRAIN FUEL |
| 4. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR |
![]() |
Remove the 2 nuts and the front No. 2 floor heat insulator.
| 5. REMOVE FUEL TANK COVER VENT CASE SUB-ASSEMBLY |
![]() |
Remove the clip.
Remove the bolt and fuel tank cover vent case sub-assembly.
| 6. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY |
![]() |
Disengage the fuel tube connector cover.
| *1 | Checker |
| *2 | Fuel Tube Connector |
| *3 | O-ring |
| *4 | Retainer |
![]() | Pinch |
![]() | Pull |
Pinch the retainer by hand from both sides, and pull out the fuel tube connector from the pipe.
| 7. DISCONNECT NO. 2 FUEL EMISSION TUBE |
![]() |
Loosen the clamp and disconnect the No. 2 fuel emission tube.
| *1 | Rubber Hose |
| *2 | O-ring |
| *3 | Fuel Pipe |
| *4 | Retainer |
| *a | Pull Back |
| *b | Pull Out |
| 8. REMOVE FUEL TANK ASSEMBLY |
![]() |
Remove the bolt.
Disengage the clip as shown in the illustration and remove the fuel tank filler pipe flange plate.
Using an engine lifter, support the fuel tank assembly.
![]() |
Separate the 2 fuel hoses shown in the illustration.
![]() |
Remove the 4 bolts and fuel tank assembly.
| 9. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY |
![]() |
Disengage the clamp and remove the fuel tank main tube from the fuel tank assembly.
| 10. REMOVE NO. 2 FUEL EMISSION TUBE |
![]() |
Disengage the clamp and remove the No. 2 fuel emission tube from the fuel tank assembly.
| 11. REMOVE NO. 1 CANISTER OUTLET HOSE SUB-ASSEMBLY |
![]() |
Remove the No. 1 canister outlet hose from the fuel tank assembly.
| 12. REMOVE FUEL HOSE CLAMP |
![]() |
Remove the fuel hose clamp.
| 13. REMOVE NO. 2 FUEL TANK FILLER PIPE SUPPORT |
![]() |
Disengage the clamp as shown in the illustration, and remove the No. 2 fuel tank filler pipe support.
| 14. REMOVE NO. 1 FUEL TANK FILLER PIPE SUPPORT |
![]() |
Disengage the clamp as shown in the illustration, and remove the No. 1 fuel tank filler pipe support.
| 15. REMOVE NO. 3 FUEL TANK FILLER PIPE SUPPORT |
![]() |
Disengage the clamp as shown in the illustration, and remove the No. 3 fuel tank filler pipe support.