BRAKE MASTER CYLINDER (for RHD) > DISASSEMBLY |
| 1. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY |
![]() |
Fix the brake master cylinder in a vise between aluminum plates.
Using a pin punch and a hammer, tap out the straight pin and remove the brake master cylinder reservoir.
| 2. REMOVE MASTER CYLINDER RESERVOIR GROMMET |
Remove the 2 grommets from the master cylinder reservoir.
| 3. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY |
| 4. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER |