REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side) > REMOVAL |
| 1. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim) |
![]() |
Disconnect the 2 package tray trim suspenders.
![]() |
Remove the package tray trim panel assembly.
| 2. REMOVE REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY |
![]() |
| *1 | Rear Seat Cushion Lock Hook |
| *2 | Rear Side of Rear Seat Cushion Frame |
Lift up the front edge of the rear seat cushion with cover pad sub-assembly as shown in the illustration and disengage the 2 hooks from the rear seat cushion lock hooks.
Pass the rear seat inner belt through the slit of the rear seat cushion cover with pad sub-assembly, disengage the 2 hooks from the rear side of the rear seat cushion frame, and remove the rear seat cushion cover with pad sub-assembly.
| 3. REMOVE REAR SEAT CUSHION LOCK HOOK |
![]() |
Disengage the 4 claws to remove the 2 rear seat cushion lock hooks.
| 4. REMOVE REAR SEATBACK ASSEMBLY LH |
![]() |
Fold the rear seatback assembly LH forward.
Remove the 2 bolts and rear seatback assembly LH.