Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE BENCH TYPE REAR SEAT CUSHION COVER


    B283290
  1. Remove the 44 hog rings and the bench type rear seat cushion cover from the bench type rear seat cushion pad.



2. REMOVE REAR SEAT HEADREST ASSEMBLY
  1. Remove the rear seat headrest assembly.



3. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY
  1. Remove the rear seat center headrest assembly.



4. REMOVE REAR SEATBACK COVER

HINT:
B272786E02
Use the same procedure for both sides.
Text in Illustration 
*1
Protective Tape

  1. Using a screwdriver wrapped with protective tape, disengage the 4 claws to remove the rear seatback cover.



5. REMOVE REAR SEATBACK LOCK RELEASE BUTTON


    B272889
  1. Turn the rear seatback lock release button in the direction indicated by arrow to remove it.



6. REMOVE REAR SEATBACK STOP BUTTON GROMMET


    B272895
  1. Disengage the 2 claws to remove the rear seatback stop button grommet.



7. REMOVE REAR SEAT HEADREST SUPPORT


    B285906
  1. Using a clip remover, remove the 8 clips.



    B283267
  1. Disengage the 5 hooks.



    B283263
  1. Disengage the 8 claws to remove the 4 front seat headrest supports.



8. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY LH


    B283265
  1. Remove the rear seatback frame sub-assembly LH.



9. REMOVE REAR SEATBACK LOCK ASSEMBLY LH


    B272897
  1. Remove the 2 bolts and the rear seatback lock assembly LH from the rear seatback frame subassembly LH.



10. REMOVE SEPARATE TYPE REAR SEATBACK COVER


    B283276
  1. Remove the 6 hog rings and the separate type rear seatback cover from the separate type rear seatback pad.