REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side) > REASSEMBLY |
| 1. INSTALL SEPARATE TYPE REAR SEATBACK COVER |
![]() |
Using hog ring pliers, install the separate type rear seatback cover to the separate type rear seatback pad with 6 new hog rings.
| *1 | New Hog Ring |
| *2 | Hog Ring Pliers |
| 2. INSTALL REAR SEATBACK LOCK ASSEMBLY LH |
![]() |
Install the rear seatback lock assembly LH with the 2 bolts.
| 3. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY LH |
![]() |
Temporarily install the rear seatback frame sub-assembly LH.
![]() |
Engage the 5 hooks.
![]() |
Engage the 8 clips to install the rear seatback frame sub-assembly.
| 4. INSTALL REAR SEAT HEADREST SUPPORT |
![]() |
Align the protruding portion of the rear seat headrest support with the installation groove of the rear seatback frame sub-assembly LH.
| *a | protruding |
Engage the 8 claws to install the 4 rear seat headrest support.
| 5. INSTALL REAR SEATBACK STOP BUTTON GROMMET |
![]() |
Engage the 2 claws to install the rear seatback stop button grommet.
| 6. INSTALL REAR SEATBACK LOCK RELEASE BUTTON |
![]() |
Turn the rear seatback lock release button in the direction indicated by arrow to install it.
| 7. INSTALL REAR SEATBACK COVER |
![]() |
Engage the 4 claws to install the rear seatback cover.
| 8. INSTALL REAR SEAT HEADREST ASSEMBLY |
Install the rear seat headrest assembly.
| 9. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY |
Install the rear seat center headrest assembly.
| 10. INSTALL BENCH TYPE REAR SEAT CUSHION COVER |
![]() |
Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 44 new hog rings.
| *1 | New Hog Ring |
| *2 | Hog Ring Pliers |