REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side) > INSTALLATION |
| 1. INSTALL REAR SEATBACK ASSEMBLY RH |
![]() |
Engage the 2 hooks and temporarily install the rear seatback assembly RH.
Install the 2 bolts in the sequence shown in the illustration.
Pull back the rear seatback assembly RH.
| 2. INSTALL REAR SEAT CUSHION LOCK HOOK |
Engage the 4 claws to install the 2 rear seat cushion lock hooks.
| 3. INSTALL REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY |
![]() |
Pass the rear seat inner belt through the slit of the rear seat cushion cover with pad sub-assembly.
| *1 | Rear Side of Rear Seat Cushion Frame |
| *2 | Rear Seat Cushion Lock Hook |
Align the rear side of the rear seat cushion frame with the 2 hooks.
Engage the 2 hooks with the rear seat cushion lock hooks to install the rear seat cushion cover with pad sub-assembly.
| 4. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim) |
Install the package tray trim panel assembly.
Connect the 2 package tray trim suspenders.