Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side) > REMOVAL

for Preparation Click here



1. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)


    B272910
  1. Disconnect the 2 package tray trim suspenders.



    B272911
  1. Remove the package tray trim panel assembly.



2. REMOVE REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY


B272780E02
Text in Illustration 
*1
Rear Seat Cushion Lock Hook
*2
Rear Side of Rear Seat Cushion Frame
  1. Lift up the front edge of the rear seat cushion with cover pad sub-assembly as shown in the illustration and disengage the 2 hooks from the rear seat cushion lock hooks.

    NOTICE:
    Be sure hold the part of the seat cushion directly next to the rear seat cushion lock hooks when lifting it up. Lifting a different part of the cushion can deform the rear seat cushion frame.

  1. Pass the rear seat inner belt through the slit of the rear seat cushion cover with pad sub-assembly, disengage the 2 hooks from the rear side of the rear seat cushion frame, and remove the rear seat cushion cover with pad sub-assembly.



3. REMOVE REAR SEAT CUSHION LOCK HOOK


    B272965
  1. Disengage the 4 claws to remove the 2 rear seat cushion lock hooks.



4. REMOVE REAR SEATBACK ASSEMBLY RH
  1. Fold the rear seatback assembly RH forward.



    B272783
  1. Remove the 2 bolts and rear seatback assembly RH.