Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE BENCH TYPE REAR SEAT CUSHION COVER


    B283290
  1. Remove the 44 hog rings and the bench type rear seat cushion cover from the bench type rear seat cushion pad.



2. REMOVE REAR SEAT HEADREST ASSEMBLY
  1. Remove the rear seat headrest assembly.



3. REMOVE REAR SEATBACK COVER


    B272891E02
  1. Using a screwdriver wrapped with protective tape, disengage the 4 claws to remove the rear seatback cover.
    Text in Illustration 
    *1
    Protective Tape



4. REMOVE REAR SEATBACK LOCK RELEASE BUTTON


    B272898
  1. Turn the rear seatback lock release button in the direction indicated by arrow to remove it.



5. REMOVE REAR SEATBACK STOP BUTTON GROMMET


B272886
Disengage the 2 claws to remove the rear seatback stop button grommet.


6. REMOVE REAR SEAT HEADREST SUPPORT


    B272788
  1. Using a clip remover, remove the 7 clips.



    B272885
  1. Disengage the 5 hooks.



    B273339
  1. Disengage the 4 claws to remove the 2 front seat headrest supports.



7. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY RH


    B272887
  1. Remove the rear seatback frame sub-assembly RH.



8. REMOVE REAR SEATBACK LOCK ASSEMBLY RH


    B272888
  1. Remove the 2 bolts and the rear seatback lock assembly RH from the rear seatback frame subassembly.



9. REMOVE SEPARATE TYPE REAR SEATBACK COVER


    B283273
  1. Remove the 6 hog rings and the separate type rear seatback cover from the separate type rear seatback pad.