Home › General › SPECIFICATIONS › DRIVE SHAFT / PROPELLER SHAFT

DRIVE SHAFT / PROPELLER SHAFT > SERVICE DATA



Front Drive Shaft Assembly (for 1NZ-FE) 
Outboard joint boot grease capacity
Standard
116 to 126 g (4.1 to 4.4 oz.)
Inboard joint boot grease capacity
Standard
125 to 135 g (4.4 to 4.8 oz.)
Front drive shaft damper distance (for RH Side)
425.6 to 429.6 mm (16.76 to 16.91 in.)
Front drive shaft standard length
LH
584.3 mm (23.00 in.)
RH
826.3 mm (32.53 in.)

Front Drive Shaft Assembly (for 2NZ-FE) 
Outboard joint boot grease capacity
Standard
90 to 100 g (3.2 to 3.5 oz.)
Inboard joint boot grease capacity
Standard
112 to 122 g (4.0 to 4.3 oz.)
Front drive shaft damper distance (for RH Side)
416 to 420 mm (16.38 to 16.54 in.)
Front drive shaft standard length
LH
589.3 mm (23.20 in.)
RH
829.3 mm (32.65 in.)