DTC B161B/1A Front Center Airbag Sensor |
| DTC No. | DTC Detection Condition | Trouble Area |
| B161B/1A | Either condition is met:
|
|

| 1.CHECK FRONT AIRBAG SENSOR |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal.
Temporarily replace the front airbag sensor with a new one.
Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Clear the DTCs stored in memory (Click here).
Turn the ignition switch off.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTC B161B/1A is not output | A |
| DTC B161B/1A is output | B |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal.
Reinstall the former front airbag sensor, and connect the connector.
|
| ||||
| A | ||
| ||