Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR (for 1NZ-FE, 2NZ-FE)

COMPRESSOR (for 1NZ-FE, 2NZ-FE) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT COMPRESSOR FOR METALLIC SOUND
  1. Check if there are any abnormal metallic sounds from the compressor when the A/C switch is on and the compressor operates.
    If any abnormal metallic sound is heard, replace the compressor.



2. INSPECT REFRIGERANT PRESSURE

HINT:
(Click here)



3. INSPECT FOR LEAKAGE OF REFRIGERANT
  1. Using a halogen leak detector, check for leakage of refrigerant.
    If there is any leakage, replace the compressor.



4. INSPECT COMPRESSOR WITH PULLEY ASSEMBLY


  1. Check operation of compressor with pulley assembly.

    1. Start the engine.



    2. Inspect the compressor with pulley assembly.


      E218245E01


      Text in Illustration 
      *1
      Pulley
      -
      -

      OK:
      The compressor shaft rotates along with the pulley.

      If the result is not as specified, replace the compressor with pulley assembly.