SIDE TURN SIGNAL LIGHT ASSEMBLY > INSPECTION |
| 1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH |
![]() |
Apply battery voltage to the connector and check the side turn signal light comes on.
| *a | Component without harness connected (Side Turn Signal Light Assembly LH) |
| Measurement Condition | Specified Condition |
| Battery positive (+) → 1 Battery negative (-) → 2 | Side turn signal light comes on |
| 2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH |
![]() |
Apply battery voltage to the connector and check the side turn signal light comes on.
| *a | Component without harness connected (Side Turn Signal Light Assembly RH) |
| Measurement Condition | Specified Condition |
| Battery positive (+) → 1 Battery negative (-) → 2 | Side turn signal light comes on |