Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 REAR COMBINATION LIGHT GUIDE
  1. Install a new No. 2 rear combination light guide to the body.



2. INSTALL REAR COMBINATION LIGHT ASSEMBLY
  1. Engage the clip and the 2 guides to install the rear combination light assembly.

  1. Install the 2 nuts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the connector.



3. INSTALL REAR COMBINATION LIGHT SERVICE COVER


    E222140
  1. Engage the 2 guides and 3 claws to install the rear combination light service cover.



4. INSTALL REAR BUMPER COVER (for Sport Package)
(Click here)


5. INSTALL REAR BUMPER COVER (except Sport Package)
(Click here)