Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL REAR COMBINATION LIGHT PROTECTOR


    E229107
  1. Install the rear combination light protector with the 2 screws.



2. INSTALL REAR COMBINATION LIGHT COVER


    E229106
  1. Install the rear combination light cover with the 2 screws.



3. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    E234726
  1. Engage the clamp to install the rear combination light socket and wire sub-assembly.



4. INSTALL BACK UP LIGHT BULB
  1. Install the back up light bulb into the rear combination light socket and wire sub-assembly.



    E228387
  1. Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to install them.



5. INSTALL REAR TURN SIGNAL LIGHT BULB
  1. Install the rear turn signal light bulb into the rear combination light socket and wire sub-assembly.



    E228385
  1. Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to install them.



6. INSTALL TAIL AND STOP LIGHT BULB
  1. Install the tail and stop light bulb into the rear combination light socket and wire sub-assembly.



    E234727
  1. Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to install them.



7. INSTALL REAR COMBINATION LIGHT BODY PACKING


    E234724
  1. Install a new rear combination light body packing.