FRONT BUMPER (for Sport Package) > DISASSEMBLY |
| 1. REMOVE HOOD TO FRONT END PANEL SEAL |
![]() |
Remove the 4 clips.
While peeling off the double-sided adhesive tape, remove the hood to front end panel seal.
| 2. REMOVE RADIATOR GRILLE |
![]() |
Remove the 3 clips.
![]() |
Disengage the 12 claws, guide and remove the radiator grille.
| 3. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM |
![]() |
Disengage the 4 claws, 2 guides and remove the radiator grill (or front panel) emblem.
| 4. REMOVE FRONT BUMPER LOWER COVER |
![]() |
Disengage the 2 claws and remove the front bumper lower cover.
| 5. REMOVE LOWER NO. 1 RADIATOR GRILLE |
![]() |
Remove the 2 screws.
Disengage the 14 claws and remove the lower No. 1 radiator grille.
| 6. REMOVE RADIATOR GRILLE LOWER MOULDING |
![]() |
Remove the 6 screws.
Disengage the 5 claws and remove the radiator grille lower moulding.
| 7. REMOVE FOG LIGHT ASSEMBLY LH |
Disconnect the connector.
![]() |
Remove the 2 screws.
Disengage the guide to remove the fog light assembly.
| 8. REMOVE FOG LIGHT ASSEMBLY RH |
| 9. REMOVE FOG LIGHT COVER LH |
![]() |
Disengage the 5 claws and remove the fog light cover.
| 10. REMOVE FOG LIGHT COVER RH |
| 11. REMOVE HEADLIGHT ASSEMBLY LH |
![]() |
Remove the 3 screws.
Disconnect the connectors and remove the headlight assembly.
| 12. REMOVE HEADLIGHT ASSEMBLY RH |
| 13. REMOVE FRONT BUMPER SIDE RETAINER LH |
![]() |
Disengage the 2 claws and remove the front bumper side retainer.
| 14. REMOVE FRONT BUMPER SIDE RETAINER RH |
| 15. SEPARATE THERMISTOR ASSEMBLY |
![]() |
Disengage the 2 clamps and remove the thermistor.
| 16. REMOVE RADIATOR SUPPORT EXTENSION LH |
![]() |
Disengage the 2 claws and remove the radiator support extension.
| 17. REMOVE RADIATOR SUPPORT EXTENSION RH |
| 18. REMOVE NO. 2 RADIATOR SIDE AIR SEAL |
![]() |
Disengage the 2 claws and remove the radiator side air seal.
| 19. REMOVE NO. 1 RADIATOR SIDE AIR SEAL |
| 20. REMOVE FRONT BUMPER ENERGY ABSORBER (w/ Energy Absorber) |
![]() |
Disengage the 2 guides and remove the front bumper energy absorber.
| 21. REMOVE FRONT BUMPER REINFORCEMENT |
![]() |
Disengage the 2 clamps and disconnect the wire harness.
![]() |
Remove the 6 bolts.
Remove the 4 nuts and the front bumper reinforcement.
| 22. REMOVE FRONT NO. 1 BUMPER STONE DEFLECTOR BRACKET |
![]() |
Remove the 2 nuts and the front No. 1 bumper stone deflector bracket.
| 23. SEPARATE WINDSHIELD WASHER JAR ASSEMBLY |
![]() |
Remove the bolt and separate the windshield washer jar.
| 24. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH |
![]() |
Remove the 4 bolts.
Disengage the 2 guides and remove the front side member bracket.
| 25. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH |
| 26. REMOVE ENGINE UNDER COVER LH (w/ Front Bumper Lower Absorber) |
| 27. REMOVE ENGINE UNDER COVER RH (w/ Front Bumper Lower Absorber) |
| 28. REMOVE FRONT BUMPER ENERGY ABSORBER SUB-ASSEMBLY (w/ Front Bumper Lower Absorber) |
![]() |
Remove the 6 screws, 6 clips and grommet.
![]() |
Disengage the 3 hooks and remove the front bumper energy absorber.