Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER (except Sport Package)

REAR BUMPER (except Sport Package) > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR BUMPER PLATE LH (w/ Reflex Reflector Assembly)


    B289850
  1. Remove the screw.

  1. Disengage the 2 claws and remove the rear bumper plate.



2. REMOVE REAR BUMPER PLATE RH (w/ Reflex Reflector Assembly)

HINT:
Use the same procedure as for the LH side.



3. REMOVE REAR BUMPER SIDE SEAL LH


    B272396
  1. Remove the 2 clips and the rear bumper side seal.



4. REMOVE REAR BUMPER SIDE SEAL RH

HINT:
Use the same procedure as for the LH side.



5. REMOVE REAR BUMPER SIDE RETAINER LH


    B272394
  1. Remove the screw.

  1. Disengage the 2 claws and guide and remove the rear bumper side retainer.



6. REMOVE REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.



7. REMOVE REAR BUMPER SIDE SUPPORT LH


    B272395
  1. Remove the screw.

  1. Disengage the 2 claws and rear bumper side support.



8. REMOVE REAR BUMPER SIDE SUPPORT RH

HINT:
Use the same procedure as for the LH side.



9. REMOVE REAR BUMPER PLATE LH (for Type A)


    B288642
  1. Remove the 3 bolts and the rear bumper plate.



10. REMOVE REAR BUMPER PLATE RH (for Type A)

HINT:
Use the same procedure as for the LH side.



11. REMOVE REAR BUMPER PLATE LH (for Type B)

HINT:
Use the same procedure as for the Type A side.



12. REMOVE REAR BUMPER PLATE RH (for Type B)

HINT:
Use the same procedure as for the LH side.



13. REMOVE REAR NO. 2 BUMPER REINFORCEMENT (for Type B)


    B283041
  1. Disengage the 2 guides and remove the rear bumper reinforcement.



14. REMOVE REAR NO. 1 BUMPER REINFORCEMENT (for Type C)


    B288643
  1. Remove the 4 nuts and the rear bumper reinforcement.



15. REMOVE REAR BUMPER ARM LH (for Type C)


    B288644
  1. Remove the 3 bolts and the rear bumper arm.



16. REMOVE REAR BUMPER ARM RH (for Type C)

HINT:
Use the same procedure as for the LH side.



17. REMOVE REAR NO. 2 BUMPER REINFORCEMENT (for Type C)

HINT:
Use the same procedure as for the Type B side.